1 ) First of all, you need to download and install gPad client on your android device.
2) Now you need to install gPad server client on your Windows & Mac PC.
3 ) When installation is done, you need to pair both your smartphone to your PC or Mac through Bluetooth, USB cable or connected under the same WiFi connection (If you are using WiFi connection, make sure you know your computer’s IP address, you may need them in the phone setup in case the connection fails). The pairing must be done before proceeding with the next step.
4 ) Open the gPad application from your computer and leave it active.
5 ) Now open the gPad application on your phone, select ‘Settings’ and then select the ‘Connection type’. In the connection type, select between WiFi, Bluetooth and USB connection.
.jpg)
6) After the connection type is selected, go back to the "Settings" page, scroll down to the relevant setting (Bluetooth, WiFi or USB) and click "Scan". Select your computer as the pairing device.
7 ) If you see on the Settings page an option to input "IP address", this is where you place yourcomputer’s IP if your connection fails via WiFi.
8 ) Now go back to the gPad main menu on your phone, click open "touchpad", and you should now be able to remotely control your computer’s cursor from your phone. This is possible for as long as your phone is still connected to your computer via Bluetooth, WiFi or USB cable.
.jpg)
9) You can now turn your smartphone into a remote control for your computer. Use your mouse to control your laptop, PC or Mac from afar, or you can navigate through your powerpoint presentation slides or through video presentations with configured touchpads.
2) Now you need to install gPad server client on your Windows & Mac PC.
3 ) When installation is done, you need to pair both your smartphone to your PC or Mac through Bluetooth, USB cable or connected under the same WiFi connection (If you are using WiFi connection, make sure you know your computer’s IP address, you may need them in the phone setup in case the connection fails). The pairing must be done before proceeding with the next step.
4 ) Open the gPad application from your computer and leave it active.
7 ) If you see on the Settings page an option to input "IP address", this is where you place yourcomputer’s IP if your connection fails via WiFi.
8 ) Now go back to the gPad main menu on your phone, click open "touchpad", and you should now be able to remotely control your computer’s cursor from your phone. This is possible for as long as your phone is still connected to your computer via Bluetooth, WiFi or USB cable.
No comments:
Post a Comment